Stainless Steel Push to Connect Fittings for Metric Tubing, BSPP, G Thread - SPH-G Male Banjo

SPH-G metric tubing to BSPP, G thread male banjo stainless steel push to connect fitting is used to connect a female BSPP, G threaded connection to a metric tubing at a right angle. BSPP, G thread stainless steel push in fitting is made of 316 stainless steel for corrosion resistance, FKM seal for chemical-resistance. BSPP, G thread stainless steel push to connect fitting has an FKM (Viton) o-ring on the thread to provide safe sealing. Stainless steel fitting has hexagon head on the top allowing tightening with a hexagon wrench in limited spaces. Stainless steel fittings are suitable for air, pneumatic, machine tools, food and beverage applications. Pneuflex’s stainless steel pneumatic fittings provide easy tube insertion and removal for rapid assembly. Accommodate metric tubing O.D ranging from 4 mm to 16 mm, thread size from BSPP, G 1/8 to BSPP, G 1/2.

 316 Stainless Steel Push to Connect Fittings, SPH-G Male Banjo, BSPP, G Thread
Part #: SPH-G Male Banjo
Psuh-in Tubing O.D: From 4mm to 16mm
Thread Size: From BSPP, G 1/8 to BSPP, G 1/2
Fluid Admitted: Air, Vacuum, Water (no freezing), Steam
Body Material: 316 Stainless Steel
Thread Material: 316 Stainless Steel
Thread Sealing: O-ring
Seal, O-ring: FKM (Viton)
Working Pressure: 0—2.0 MPa | 0—290 psi
Proof Pressure: 3.0 Mpa | 435 psi
Negative Pressure: -100 Kpa | -29.5 In Hg
Working Temperature: -20~150°C | -4~302°F
Lock Claw: Stainless Steel (SUS)
Applicable Tube: PU / PA / PE / PVC / Teflon