Composite Push to Connect Fittings for Metric Tubing, BSPP, G Thread

Pneuflex's metric composite push in fittings (pneumatic fittings, push to connect fittings) are made of nickel plated brass(thread) and PBT(body). Stainless steel tube gripping claws, collars and release sleeves(collets) offer a quick hold and release mechanism to provide a low disconnection force for easy removal of the tubing. Pneuflex's push in fittings (push to connect fittings) come in a variety of types, models and sizes to satisfy various piping demands and provide essential links between components in pneumatic systems. Accommodate metric tubing O.D ranging from 4mm to 16mm and inch tubing O.D from 1/8" to 1/2". Thread sizes ranges from BSPP, G1/8 to BSPP, G1/2.

Technical Characteristics

Metric Composite Push to Connect Fittings (PT, R, BSPT Thread) Structure    Fluid Admitted Air, Vacuum, Water (no freezing)
   Working Pressure 0—1.0MPa | 0—150psi
   Proof Pressure 3.0Mpa | 435psi
   Negative Pressure -100Kpa | -29.5 In Hg
   Working Temperature 0—60°C | 32~140°F
   Applicable Tube PU / PA / PE / PVC
   Body Nickel Plated Brass & PBT
   Seal, O-ring NBR
   Lock Claw Stainless Steel(SUS)
 

Metric Tubing O.D

Metric Tube ØD
4mm 5mm 6mm 7mm 8mm 9mm 10mm 12mm 14mm 15mm 16mm
 

Thread Standard and Type

Thread Standard and Type
R, PT, BSPT -- 55° Taper Pipe Thread Metric Thread
R1/8 R1/4 R3/8 R1/2 M5 x 0.8 M6 x 1 M8 x 1 M10 x 1 M12 x 1.25 M14 x 1.5 M16 x 1.5 M20 x 1.5
 
UNF NPT-60°American Standard Taper Pipe Thread BSPP, G-55° Parallel Pipe Thread
10-32UNF 1/8 NPT 1/4 NPT 3/8 NPT 1/2 NPT G1/8 G1/4 G3/8 G1/2

Various Types of Metric Composite Push to Connect Fittings with BSPP, G Thread