Composite Push to Connect Fittings for Metric Tubing, NPT, UNC, UNF Thread

Pneuflex's push to connect fittings (pneumatic fittings, push in fittings) are made of nickel plated brass(thread) and PBT(body). Stainless steel tube gripping claws, collars and release sleeves(collets) offer a quick hold and release mechanism to provide a low disconnection force for easy removal of the tubing. Pneuflex's push to connect fittings (push in fittings) come in a variety of types, models and sizes to satisfy various piping demands and provide essential links between components in pneumatic systems. Accommodate metric tubing O.D ranging from 4mm to 16mm and inch tubing O.D from 1/8" to 1/2". Thread sizes ranges from 10-32UNF to 1/2NPT.

Technical Characteristics

Metric Composite Push to Connect Fittings (PT, R, BSPT Thread) Structure    Fluid Admitted Air, Vacuum, Water (no freezing)
   Working Pressure 0—1.0MPa | 0—150psi
   Proof Pressure 3.0Mpa | 435psi
   Negative Pressure -100Kpa | -29.5 In Hg
   Working Temperature 0—60°C | 32~140°F
   Applicable Tube PU / PA / PE / PVC
   Body Nickel Plated Brass & PBT
   Seal, O-ring NBR
   Lock Claw Stainless Steel(SUS)
 

Metric Tubing O.D

Metric Tube ØD
4mm 5mm 6mm 7mm 8mm 9mm 10mm 12mm 14mm 15mm 16mm
 

Thread Standard and Type

Thread Standard and Type
R, PT, BSPT -- 55° Taper Pipe Thread Metric Thread
R1/8 R1/4 R3/8 R1/2 M5 x 0.8 M6 x 1 M8 x 1 M10 x 1 M12 x 1.25 M14 x 1.5 M16 x 1.5 M20 x 1.5
 
UNF NPT-60°American Standard Taper Pipe Thread BSPP, G-55° Parallel Pipe Thread
10-32UNF 1/8 NPT 1/4 NPT 3/8 NPT 1/2 NPT G1/8 G1/4 G3/8 G1/2

Various Types of Metric Composite Push to Connect Fittings with NPT Thread


Show:
PC Male Connector

Metric NPT thread composite male connector is used to tube a female thread port in the same direction. Male connector is a kind of generally used push in fitting. Male straight connector push to connect fittings (push in fittings) with hexagonal body allow tightening with a flat wrench or socket wrench, internal adjustment with an Allen wrench. The body parts can be nickel plated brass or natural brass. Metric tubing O.D ranging from 4mm to 16mm, thread ranging from 10-32UNF to 1/2 NPT.

POC Hexagon Male Connector

Metric composite push to connect fittings NPT thread hexagon male connector (male round straight) is a kind of commonly used pneumatic fittings (push in fittings). The body parts can be nickel plated brass or natural brass. The tube straight connected to a female threaded port. Internal adjustment with an Allen Wrench. Accommodate metric tubing O.D ranging from 4mm to 16mm, thread size ranging from 10-32UNF to 1/2 NPT.

PL Male Elbow

Male elbow is a kind of commonly used pneumatic fittings. Pneumatic male elbow connects a tube at a 90° angle to a female thread, which can be externally tightened with a flat wrench. Male elbow and male swivel elbow can be selected. The body parts can be nickel plated brass or natural brass. Push to connect fittings (push in fittings) male elbow accommodates metric tubing O.D ranging from 4mm to 16mm and thread size ranging from 10-32UNF to 1/2 NPT.

PLL Extended Male Elbow

Pneumatic extended male elbow push to connect fittings (push in fittings) connects a tube at a 90° angle to a female thread. Extended male elbow is commonly used together with male elbow. The body parts can be nickel plated brass or natural brass. Pneumatic extended male elbow accommodates metric tubing O.D ranging from 4mm to 16mm and thread size ranging from 10-32UNF to 1/2 NPT.

PLF Female Elbow

Push to connect fittings (push in fittings) male elbow is a kind of commonly used pneumatic fittings. Female elbow is used to connect tubing at a 90 ° angle to a male threaded port. The body parts can be nickel plated brass or natural brass. Female elbow accommodates metric tubing O.D ranging from 4mm to 16mm and thread size ranging from 10-32UNF to 1/2 NPT.

PCF Female Straight

Pneumatic female straight (female connector) is used to connect male thread port and a tube in line.The female straight push to connect fittings (push in fittings) body parts can be nickel plated brass or natural brass. Accommodate metric tubing O.D ranging from 4mm to 16mm and thread size ranging from 10-32UNF to 1/2 NPT.

PB Male Branch Tee

Pneumatic male branch tee is used to connect two branch tubes at a 90° angle to a female thread. Male branch tee push to connect fittings (push in fittings) use a flat wrench to tighten external thread. The body parts can be nickel plated brass or natural brass. Male branch tee accommodates metric tubing O.D ranging from 4mm to 16mm and thread size ranging from 10-32 UNF to 1/2 NPT.

PBF Female Branch Tee

Pneumatic female branch tee is used to connect two branch tubes at a 90° angle to a male thread. External tightening with a flat wrench. The body parts can be nickel plated brass or natural brass. Pneumatic push to connect fittings (push in fittings) female branch tee accommodates metric tubing O.D ranging from 4mm to 16mm and thread ranging from 10-32UNF to 1/2 NPT.

PD Male Run Tee

Male run tee is a commonly used pneumatic push to connect fittings. It is used to branch line in the same direction from female threaded connection and in 90° direction. The body parts can be nickel plated brass or natural brass. External tightening with a flat wrench, internal adjustment with an Allen wrench. Accommodate metric tubing O.D ranging from 4mm to 16mm and thread ranging from 10-32UNF to 1/2 NPT.

PDF Female Run Tee

Pneuflex's female run tee pneumatic fittings (push in fittings, push to connect fittings) connects a device to a tubing run at a 90° turn. Female run tee body parts can be nickel plated brass or natural brass. External tightening with a flat wrench. Accommodate metric tubing O.D ranging from 4mm to 16mm and thread ranging from 10-32UNF to 1/2 NPT.

PX Male Y

Pneuflex pneumatic push to connect fittings male Y use for branch a female thread. Push in fittings male Y connects two tubes in the same direction. External tightening with a flat wrench. The body parts can be nickel plated brass or natural brass. Male Y accommodates metric tubing O.D ranging from 4mm to 16mm and thread ranging from 10-32UNF to 1/2 NPT.

PXF Female Y

Pneumatic female Y use to branch a male thread. Male Y push to connect fittings (push in fittings, one touch tube fittings) connects two tubes in the same direction. External tightening with a flat wrench. The body parts can be nickel plated brass or natural brass. Accommodate metric tubing O.D ranging from 4mm to 16mm and thread size ranging from 10-32UNF to 1/2 NPT.

PKB Male Triple Branch

Pneumatic male triple branch connects three tubes at a 90° angle and one tube in line to a female thread. Male triple branch (Triple universal male branch) push to connect fittings can be externally tightened with a flat wrench. Accommodate metric tubing O.D ranging from 4mm to 16mm and thread ranging from 10-32UNF to 1/2 NPT.

PKD Male Triple Branch Reducer

Pneumatic male triple branch reducer (male reduced triple branch) connects three equal ØD tubes at a 90° angle and one different ØD tube to a female thread. Male triple branch reducer push to connect fittings (push in fittings) can be externally tightened with a flat wrench. Accommodate metric tubing O.D ranging from 4mm to 16mm and thread ranging from 10-32UNF to 1/2 NPT.

PH Male Banjo

Pneumatic male banjo connects a tube at 90° angle to a female thread port. Male banjo push to connect fittings (one touch tube fittings, push in fittings) is tightened on the top of the fittings by use of a flat wrench or a socket wrench. The body parts can be nickel plated brass or natural brass. Accommodate metric tubing O.D ranging from 4mm to 16mm and thread size ranging from 10-32UNF to 1/2 NPT.

PHF Female Banjo

Female banjo is a commonly used part in the series of pneumatic fittings. Push to connect fittings (push in fittings) female banjo is used to connect tube branch line in the same direction and at the right angle to a male thread. External tightening with a flat wrench. Female banjo accommodates metric tubing O.D ranging from 4mm to 16mm and thread ranging from 10-32 UNF to 1/2 NPT.

PMF Bulkhead Female Connector

Bulkhead female connector (bulkhead female straight) is commonly used to connect male thread and tube through a panel, which can be externally tightened with a flat wrench. Bulkhead female connector push in fittings (push to connect fittings) body parts can be nickel plated brass or natural brass. Accommodate metric tubing O.D ranging from 4mm to 16mm and thread ranging from 10-32UNF to 1/2 NPT.

PHX Male Delta Branch

Pneumatic male delta branch push to connect fittings (push in fittings, one touch tube fittings) is used to connect female thread fittings and four tubes in line. External tightening with a flat wrench. Push to connect male delta branch accommodates metric tubing O.D ranging from 4mm to 16mm and thread ranging from 10-32UNF to 1/2 NPT.

PHD Male Double Banjo

Male double banjo is used to connect two tubes at a 90° angle to a female thread port. Male double banjo push to connect fittings (pneumatic fittings, push in fittings) external tightening with a flat wrench or a socket wrench. The two tubes can be 360° swiveled easily. Accommodate metric tubing O.D ranging from 4mm to 16mm and thread ranging from 10-32UNF to 1/2 NPT.

PHT Male Triple Banjo

Male triple banjo pneumatic fittings is used to connect three tubes at 90° angle to a female thread. The body parts can be nickel plated brass or natural brass. Tightened on the top of the fittings by use of a flat wrench or a socket wrench. The three tubes can be 360° swiveled easily. Accommodate metric tubing O.D ranging from 4mm to 16mm and thread ranging from 10-32UNF to 1/2 NPT.

PHDY Double Branch Male Elbow

Double branch male banjo is commonly used to connect four tubes at a 90° angle to a female thread. Pneumatic double branch male elbow push to connect fittings (push in fittings) external tightening with a flat wrench or a socket wrench. Accommodate metric tubing O.D ranging from 4mm to 16mm and thread ranging from 10-32UNF to 1/2 NPT.

PHY Branch Universal Male Elbow

Male banjo Y is used to connect two tubes at 90° angle to a female thread. Push to connect fittings (push in fittings, pneumatic fittings) body parts can be nickel plated brass or natural brass. External tightening with a flat wrench or a socket wrench. Accommodate metric tubing O.D ranging from 4mm to 16mm and thread size ranging from 10-32UNF to 1/2 NPT.