Sintered Stainless Steel Silencers and Mufflers - SSLM Sintered Stainless Steel Breather Vent Silencer

Sintered stainless steel breather vent silencer is commonly used on exhausts valve to reduce the noise and prevent metal chips, abrasive grits, dust and other contaminants from entering open exhaust ports. Sintered stainless steel breather noise absorbing material is sintered stainless steel powders and the thread is made of stainless steel. External tightening with a flat wrench or socket wrench. Stainless steel mufflers can use for high temperature, high pressure and corrosive environments.

Part #: SSLM Sintered Stainless Steel Breather Vent Silencer
Fluid Admitted: Compressed Air
Thread Size: From BSPT 1/8 to BSPT 1/2; From BSPP 1/8 to BSPP 1/2; From 1/8NPT to 1/2NPT; From M5 to 2"
Body (noise adsorbing material): Sintered Stainless Steel
Thread Material: Stainless Steel
Base (Thread Material): Stainless Steel
Working Pressure: 0~1.0MPa | 0~ 150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -25~150°C | -13~302°F
MOQ: 500PCS
Thread Standard and Type
PT, R, BSPT - 55° Taper Pipe Thread
R1/8 R1/4 R3/8 R1/2 R3/4 R1 R1-1/4 R1-1/2 R2
 
BSPP, G - 55° Parallel Pipe Thread
G1/8 G1/4 G3/8 G1/2 G3/4 G1 G1-1/4 G1-1/2 G2
 
UNF NPT - 60°American Standard Taper Pipe Thread
10-32 UNF 1/8 NPT 1/4 NPT 3/8 NPT 1/2 NPT 3/4 NPT 1 NPT 1-1/4 NPT 1-1/2 NPT 2 NPT
 
Metric Thread
M5 x 0.8 M6 x 1 M8 x 1 M8 x 1.25 M10 x 1 M10 x 1.25 M12 x 1.25 M12 x 1.5 M14 x 1.5 M16 x 1.5 M20 x 1.5
Part No. PT, R, BSPT Thread
SSLM 01 R1/8
SSLM 02 R1/4
SSLM 03 R3/8
SSLM 04 R1/2
SSLM 06 R3/4
SSLM 08 R1
SSLM 10 R1-1/4
SSLM 12 R1-1/2
SSLM 16 R2
Part No. BSPP (G) Thread
SSLM G01 G1/8
SSLM G02 G1/4
SSLM G03 G3/8
SSLM G04 G1/2
SSLM G06 G3/4
SSLM G08 G1
SSLM G10 G1-1/4
SSLM G12 G1-1/2
SSLM G16 G2
Part No. NPT Thread
SSLM U10 10-32UNF
SSLM N01 N1/8
SSLM N02 N1/4
SSLM N03 N3/8
SSLM N04 N1/2
SSLM N06 N3/4
SSLM N08 N1
SSLM N10 N1-1/4
SSLM N12 N1-1/2
SSLM N16 N2
There are no reviews for this product.
Write a review
BadExcellent
Part No. Metric (M) Thread
SSLM M5 x 0.8 M5 x 0.8
SSLM M6 x 1 M6 x 1
SSLM M8 x 1 M8 x 1
SSLM M8 x 1.25 M8 x 1.25
SSLM M10 x 1 M10 x 1
SSLM M10 x 1.25 M10 x 1.25
SSLM M12 x 1.25 M12 x 1.25
SSLM M14 x 1.5 M14 x 1.5
SSLM M16 x 1.5 M16 x 1.5
SSLM M20 x 1.5 M20 x 1.5