Sintered Stainless Steel Silencers and Mufflers - SSFM Stainless Steel Silencer with Filter Wire Net

Stainless steel silencer with filter wire net is commonly used to reduce the noise and prevent metal chips, abrasive grits, dust and other contaminants from entering exhaust ports. Pneumatic stainless steel wire net silencers is made of 316 stainless steel material. External tightening with a flat wrench or socket wrench. Stainless steel mufflers can use for high temperature, high pressure and corrosive environments.

Part #: SSFM Stainless Steel Silencer with Filter Wire Net
Fluid Admitted: Compressed Air
Thread Size: From BSPT 1/8 to BSPT 1/2; From BSPP 1/8 to BSPP 1/2; From 1/8NPT to 1/2NPT; From M5 to 2"
Body (noise adsorbing material): Stainless Steel Wire Net
Thread Material: Stainless Steel
Base (Thread Material): Stainless Steel
Working Pressure: 0~1.0MPa | 0~ 150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -25~150°C | -13~302°F
Thread Standard and Type
PT, R, BSPT - 55° Taper Pipe Thread
R1/8 R1/4 R3/8 R1/2 R3/4 R1 R1-1/4 R1-1/2 R2
BSPP, G - 55° Parallel Pipe Thread
G1/8 G1/4 G3/8 G1/2 G3/4 G1 G1-1/4 G1-1/2 G2
UNF NPT - 60°American Standard Taper Pipe Thread
10-32 UNF 1/8 NPT 1/4 NPT 3/8 NPT 1/2 NPT 3/4 NPT 1 NPT 1-1/4 NPT 1-1/2 NPT 2 NPT
Metric Thread
M5 x 0.8 M6 x 1 M8 x 1 M8 x 1.25 M10 x 1 M10 x 1.25 M12 x 1.25 M12 x 1.5 M14 x 1.5 M16 x 1.5 M20 x 1.5
Part No. PT, R, BSPT Thread
SSFM 01 R1/8
SSFM 02 R1/4
SSFM 03 R3/8
SSFM 04 R1/2
SSFM 06 R3/4
SSFM 08 R1
SSFM 10 R1-1/4
SSFM 12 R1-1/2
SSFM 16 R2
Part No. BSPP (G) Thread
SSFM G01 G1/8
SSFM G02 G1/4
SSFM G03 G3/8
SSFM G04 G1/2
SSFM G06 G3/4
SSFM G10 G1-1/4
SSFM G12 G1-1/2
Part No. NPT Thread
SSFM U10 10-32UNF
SSFM N01 N1/8
SSFM N02 N1/4
SSFM N03 N3/8
SSFM N04 N1/2
SSFM N06 N3/4
SSFM N10 N1-1/4
SSFM N12 N1-1/2
There are no reviews for this product.
Write a review
Part No. Metric (M) Thread
SSFM M5 x 0.8 M5 x 0.8
SSFM M6 x 1 M6 x 1
SSFM M8 x 1 M8 x 1
SSFM M8 x 1.25 M8 x 1.25
SSFM M10 x 1 M10 x 1
SSFM M10 x 1.25 M10 x 1.25
SSFM M12 x 1.25 M12 x 1.25
SSFM M14 x 1.5 M14 x 1.5
SSFM M16 x 1.5 M16 x 1.5
SSFM M20 x 1.5 M20 x 1.5