Sintered Bronze Silencers and Mufflers - BSLE Hexagon Sintered Bronze Muffler

Hexagon sintered bronze silencer is made of sintered bronze powders. Sintered bronze silencer is used on the exhausts of valves to reduce the noise and prevent metal chips, abrasive grits, dust and other contaminants from entering open exhaust ports. A slot on the top of the hexagon sintered bronze silencer is used for thread tightening.

Part #: BSLE Hexagon Sintered Bronze Muffler
Fluid Admitted: Compressed Air
Thread Size: From BSPT 1/8 to BSPT 1/2; From BSPP 1/8 to BSPP 1/2; From 1/8NPT to 1/2NPT; From M5 to 2"
Body (noise adsorbing material): Sintered Bronze
Thread Material: Sintered Bronze
Base (Thread Material): Sintered Bronze
Working Pressure: 0~1.0MPa | 0~ 150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -25~80°C | -13~176°F
MOQ: 500PCS
Thread Standard and Type
PT, R, BSPT - 55° Taper Pipe Thread
R1/8 R1/4 R3/8 R1/2 R3/4 R1 R1-1/4 R1-1/2 R2
 
BSPP, G - 55° Parallel Pipe Thread
G1/8 G1/4 G3/8 G1/2 G3/4 G1 G1-1/4 G1-1/2 G2
 
UNF NPT - 60°American Standard Taper Pipe Thread
10-32 UNF 1/8 NPT 1/4 NPT 3/8 NPT 1/2 NPT 3/4 NPT 1 NPT 1-1/4 NPT 1-1/2 NPT 2 NPT
 
Metric Thread
M5 x 0.8 M6 x 1 M8 x 1 M8 x 1.25 M10 x 1 M10 x 1.25 M12 x 1.25 M12 x 1.5 M14 x 1.5 M16 x 1.5 M20 x 1.5
Part No. PT, R, BSPT Thread
BSLE 01 R1/8
BSLE 02 R1/4
BSLE 03 R3/8
BSLE 04 R1/2
BSLE 06 R3/4
BSLE 08 R1
Part No. BSPP (G) Thread
BSLE G01 G1/8
BSLE G02 G1/4
BSLE G03 G3/8
BSLE G04 G1/2
BSLE G06 G3/4
BSLE G08 G1
Part No. NPT Thread
BSLE U10 10-32UNF
BSLE N01 N1/8
BSLE N02 N1/4
BSLE N03 N3/8
BSLE N04 N1/2
BSLE N06 N3/4
BSLE N08 N1
There are no reviews for this product.
Write a review
BadExcellent
Part No. Metric (M) Thread
BSLE M8 x 1 M8 x 1
BSLE M8 x 1.25 M8 x 1.25
BSLE M10 x 1 M10 x 1
BSLE M12 x 1.25 M12 x 1.25
BSLE M14 x 1.5 M14 x 1.5
BSLE M16 x 1.5 M16 x 1.5
BSLE M20 x 1.5 M20 x 1.5