Sintered Bronze Silencers and Mufflers - BSLD Sintered Bronze Muffler

Pneumatic sintered bronze muffler (standard silencers) is made of sintered bronze powders. Sintered bronze muffler is used to reduce the noise and prevent metal chips, abrasive grits, dust and other contaminants from entering exhaust ports. A slot on the top of the sintered bronze muffler is used for thread tightening.

Part #: BSLD Sintered Bronze Muffler
Fluid Admitted: Compressed Air
Thread Size: From BSPT 1/8 to BSPT 1/2; From BSPP 1/8 to BSPP 1/2; From 1/8NPT to 1/2NPT; From M5 to 2"
Body (noise adsorbing material): Sintered Bronze
Thread Material: Brass
Base (Thread Material): Brass
Working Pressure: 0~1.0MPa | 0~ 150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -25~80°C | -13~176°F
Thread Standard and Type
PT, R, BSPT - 55° Taper Pipe Thread
R1/8 R1/4 R3/8 R1/2 R3/4 R1 R1-1/4 R1-1/2 R2
BSPP, G - 55° Parallel Pipe Thread
G1/8 G1/4 G3/8 G1/2 G3/4 G1 G1-1/4 G1-1/2 G2
UNF NPT - 60°American Standard Taper Pipe Thread
10-32 UNF 1/8 NPT 1/4 NPT 3/8 NPT 1/2 NPT 3/4 NPT 1 NPT 1-1/4 NPT 1-1/2 NPT 2 NPT
Metric Thread
M5 x 0.8 M6 x 1 M8 x 1 M8 x 1.25 M10 x 1 M10 x 1.25 M12 x 1.25 M12 x 1.5 M14 x 1.5 M16 x 1.5 M20 x 1.5
Part No. PT, R, BSPT Thread
BSLD 01 R1/8
BSLD 02 R1/4
BSLD 03 R3/8
BSLD 04 R1/2
BSLD 06 R3/4
BSLD 08 R1
BSLD 10 R1-1/4
BSLD 12 R1-1/2
BSLD 16 R2
Part No. BSPP (G) Thread
BSLD G01 G1/8
BSLD G02 G1/4
BSLD G03 G3/8
BSLD G04 G1/2
BSLD G06 G3/4
BSLD G10 G1-1/4
BSLD G12 G1-1/2
Part No. NPT Thread
BSLD U10 10-32UNF
BSLD N01 N1/8
BSLD N02 N1/4
BSLD N03 N3/8
BSLD N04 N1/2
BSLD N06 N3/4
BSLD N10 N1-1/4
BSLD N12 N1-1/2
There are no reviews for this product.
Write a review
Part No. Metric (M) Thread
BSLD M5 x 0.8 M5 x 0.8
BSLD M6 x 1 M6 x 1
BSLD M8 x 1 M8 x 1
BSLD M8 x 1.25 M8 x 1.25
BSLD M10 x 1 M10 x 1
BSLD M10 x 1.25 M10 x 1.25
BSLD M12 x 1.25 M12 x 1.25
BSLD M14 x 1.5 M14 x 1.5
BSLD M16 x 1.5 M16 x 1.5
BSLD M20 x 1.5 M20 x 1.5