Metric Composite Push to Connect Fittings (BSPP, G Thread) -- PHT-G Male Triple Banjo

Male triple banjo pneumatic fittings is used to connect three tubes at 90° angle to a female thread. The body parts can be nickel plated brass or natural brass. Tightened on the top of the fittings by use of a flat wrench or a socket wrench. The three tubes can be 360° swiveled easily. Accommodate metric tubing O.D ranging from 4mm to 16mm and thread ranging from BSPP, G1/8 to BSPP, G1/2.

Part #: PHT-G Male Triple Banjo
Fluid Admitted: Air, Vaccum, Water*
Body Material: PBT
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Thread Material: Nickel Plated Brass
Metric Tube ØD
4mm 5mm 6mm 7mm 8mm 9mm 10mm 12mm 14mm 15mm 16mm
Inch Tube ØD
1/8" 5/32" 3/16" 1/4" 5/16" 3/8" 1/2"
Thread Standard and Type
BSPP, G -- 55° Parallel Pipe Thread
G1/8 G1/4 G3/8 G1/2

Part No. Push-in Tube ØD(mm) Thread (BSPP, G)
PHT 04-G01 4mm G1/8
PHT 04-G02 4mm G1/4
PHT 06-G01 6mm G1/8
PHT 06-G02 6mm G1/4
PHT 06-G03 6mm G3/8
PHT 06-G04 6mm G1/2
PHT 08-G01 8mm G1/8
PHT 08-G02 8mm G1/4
PHT 08-G03 8mm G3/8
PHT 08-G04 8mm G1/2
PHT 10-G01 10mm G1/8
PHT 10-G02 10mm G1/4
PHT 10-G03 10mm G3/8
PHT 10-G04 10mm G1/2
PHT 12-G01 12mm G1/8
PHT 12-G02 12mm G1/4
PHT 12-G03 12mm G3/8
PHT 12-G04 12mm G1/2
PHT 14-G02 14mm G1/4
PHT 14-G03 14mm G3/8
PHT 14-G04 14mm G1/2
PHT 15-G02 15mm G1/4
PHT 15-G03 15mm G3/8
PHT 15-G04 15mm G1/2
PHT 16-G02 16mm G1/4
PHT 16-G03 16mm G3/8
PHT 16-G04 16mm G1/2
There are no reviews for this product.
Write a review