Metric Composite Push to Connect Fittings (BSPP, G Thread) -- PD-G Male Run Tee

Male run tee push to connect fittings (pneumatic fittings, push in fittings) is used to branch line in the same direction from female threaded connection and in 90° direction. The male run tee body parts can be nickel plated brass or natural brass. External tightening with a flat wrench. Accommodate metric tubing O.D ranging from 4mm to 16mm and thread size ranging from BSPP, G1/8 to BSPP, G1/2.

Part #: PD-G Male Run Tee
Fluid Admitted: Air, Vaccum, Water*
Body Material: PBT
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Thread Material: Nickel Plated Brass
Metric Tube ØD
4mm 5mm 6mm 7mm 8mm 9mm 10mm 12mm 14mm 15mm 16mm
 
Inch Tube ØD
1/8" 5/32" 3/16" 1/4" 5/16" 3/8" 1/2"
 
Thread Standard and Type
BSPP, G -- 55° Parallel Pipe Thread
G1/8 G1/4 G3/8 G1/2

Part No. Push-in Tube ØD(mm) Thread (BSPP, G)
PD 04-G01 4mm G1/8
PD 04-G02 4mm G1/4
PD 06-G01 6mm G1/8
PD 06-G02 6mm G1/4
PD 06-G03 6mm G3/8
PD 06-G04 6mm G1/2
PD 08-G01 8mm G1/8
PD 08-G02 8mm G1/4
PD 08-G03 8mm G3/8
PD 08-G04 8mm G1/2
PD 10-G01 10mm G1/8
PD 10-G02 10mm G1/4
PD 10-G03 10mm G3/8
PD 10-G04 10mm G1/2
PD 12-G01 12mm G1/8
PD 12-G02 12mm G1/4
PD 12-G03 12mm G3/8
PD 12-G04 12mm G1/2
PD 14-G02 14mm G1/4
PD 14-G03 14mm G3/8
PD 14-G04 14mm G1/2
PD 15-G02 15mm G1/4
PD 15-G03 15mm G3/8
PD 15-G04 15mm G1/2
PD 16-G02 16mm G1/4
PD 16-G03 16mm G3/8
PD 16-G04 16mm G1/2
There are no reviews for this product.
Write a review
BadExcellent