Metric Composite Push to Connect Fittings (BSPP, G Thread) -- PB-G Male Branch Tee

Male branch tee is used to connect two branch tubes at a 90° angle to a female thread. Male branch tee pneumatic push to connect fittings (push in fittings) use a flat wrench to tighten external thread. The body parts can be nickel plated brass or natural brass. Accommodate metric tubing O.D ranging from 4mm to 16mm and thread size ranging from BSPP, G1/8 to BSPP, G1/2.

Part #: PB-G Male Branch Tee
Fluid Admitted: Air, Vaccum, Water*
Body Material: PBT
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Thread Material: Nickel Plated Brass
Metric Tube ØD
4mm 5mm 6mm 7mm 8mm 9mm 10mm 12mm 14mm 15mm 16mm
Inch Tube ØD
1/8" 5/32" 3/16" 1/4" 5/16" 3/8" 1/2"
Thread Standard and Type
BSPP, G -- 55° Parallel Pipe Thread
G1/8 G1/4 G3/8 G1/2

Part No. Push-in Tube ØD(mm) Thread (BSPP, G)
PB 04-G01 4mm G1/8
PB 04-G02 4mm G1/4
PB 06-G01 6mm G1/8
PB 06-G02 6mm G1/4
PB 06-G03 6mm G3/8
PB 06-G04 6mm G1/2
PB 08-G01 8mm G1/8
PB 08-G02 8mm G1/4
PB 08-G03 8mm G3/8
PB 08-G04 8mm G1/2
PB 10-G01 10mm G1/8
PB 10-G02 10mm G1/4
PB 10-G03 10mm G3/8
PB 10-G04 10mm G1/2
PB 12-G01 12mm G1/8
PB 12-G02 12mm G1/4
PB 12-G03 12mm G3/8
PB 12-G04 12mm G1/2
PB 14-G02 14mm G1/4
PB 14-G03 14mm G3/8
PB 14-G04 14mm G1/2
PB 15-G02 15mm G1/4
PB 15-G03 15mm G3/8
PB 15-G04 15mm G1/2
PB 16-G02 16mm G1/4
PB 16-G03 16mm G3/8
PB 16-G04 16mm G1/2
There are no reviews for this product.
Write a review