Inch (Imperial) Composite Push to Connect Fittings (PT, R, BSPT Thread) -- PKD Male Triple Branch Reducer

Pneumatic male reduced triple branch (male triple branch reducer) connects three equal ØD tubes at a 90° angle and one different ØD tube in line to a female thread. Male reduced triple branch push to connect fittings (push in fittings) can be externally tightened with a flat wrench. Accommodate inch tubing O.D ranging from 1/8" to 1/2" and thread ranging from BSPT 1/8 to BSPT 1/2.

Part #: PKD Male Triple Branch Reducer
Fluid Admitted: Air, Vaccum, Water*
Body Material: PBT
Thread Sealing: Teflon-coating
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Thread Material: Nickel Plated Brass
Metric Tube ØD
4mm 5mm 6mm 7mm 8mm 9mm 10mm 12mm 14mm 15mm 16mm
 
Inch Tube ØD
1/8" 5/32" 3/16" 1/4" 5/16" 3/8" 1/2"
 
Thread Standard and Type
R, PT, BSPT -- 55° Taper Pipe Thread Metric Thread*
R1/8 R1/4 R3/8 R1/2 M5 x 0.8 M6 x 1 M8 x 1 M10 x 1 M12 x 1.25 M14 x 1.5 M16 x 1.5 M20 x 1.5

Part No. Push-in Tube ØD(Inch) Thread (PT, R, BSPT)
PKD 1/4-5/32-01 1/4"  /  5/32" R1/8
PKD 1/4-5/32-02 1/4" /  5/32" R1/4
PKD 5/16-1/4-01 5/16"  /  1/4" R1/8
PKD 5/16-1/4-02 5/16"  /  1/4" R1/4
PKD 5/16-1/4-03 5/16"  /  1/4" R3/8
PKD 3/8-5/16-01 3/8"  /  5/16" R1/8
PKD 3/8-5/16-02 3/8"  /  5/16" R1/4
PKD 3/8-5/16-03 3/8"  /  5/16" R3/8
PKD 1/2-3/8-02 1/2"  /  3/8" R1/4
PKD 1/2-3/8-03 1/2" /  3/8" R3/8
PKD 1/2-3/8-04 1/2"  /  3/8" R1/2
There are no reviews for this product.
Write a review
BadExcellent