Inch (Imperial) Composite Push to Connect Fittings (PT, R, BSPT Thread) -- PHF Female Banjo

Push to connect fittings (push in fittings) female banjo is a commonly used part in the series of pneumatic fittings. Push to connect fittings female banjo is used to connect tube branch line in the same direction and at the right angle to a male thread. External tightening with a flat wrench. Accommodate inch tubing O.D ranging from 1/8" to 1/2" and thread ranging from BSPT 1/8 to BSPT 1/2.

Part #: PHF Female Banjo
Fluid Admitted: Air, Vaccum, Water*
Body Material: PBT
Thread Sealing: Teflon-coating
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Thread Material: Nickel Plated Brass
Metric Tube ØD
4mm 5mm 6mm 7mm 8mm 9mm 10mm 12mm 14mm 15mm 16mm
 
Inch Tube ØD
1/8" 5/32" 3/16" 1/4" 5/16" 3/8" 1/2"
 
Thread Standard and Type
R, PT, BSPT -- 55° Taper Pipe Thread Metric Thread*
R1/8 R1/4 R3/8 R1/2 M5 x 0.8 M6 x 1 M8 x 1 M10 x 1 M12 x 1.25 M14 x 1.5 M16 x 1.5 M20 x 1.5

Part No. Push-in Tube ØD(Inch) Thread (PT, R, BSPT)
PHF 1/8-01 1/8" R1/8
PHF 1/8-02 1/8" R1/4
PHF 5/32-01 5/32" R1/8
PHF 5/32-02 5/32" R1/4
PHF 1/4-01 1/4" R1/8
PHF 1/4-02 1/4" R1/4
PHF 1/4-03 1/4" R3/8
PHF 1/4-04 1/4" R1/2
PHF 5/16-01 5/16" R1/8
PHF 5/16-02 5/16" R1/4
PHF 5/16-03 5/16" R3/8
PHF 5/16-04 5/16" R1/2
PHF 3/8-01 3/8" R1/8
PHF 3/8-02 3/8" R1/4
PHF 3/8-03 3/8" R3/8
PHF 3/8-04 3/8" R1/2
PHF 1/2-01 1/2" R1/8
PHF 1/2-02 1/2" R1/4
PHF 1/2-03 1/2" R3/8
PHF 1/2-04 1/2" R1/2
There are no reviews for this product.
Write a review
BadExcellent