Inch (Imperial) Composite Push to Connect Fittings (PT, R, BSPT Thread) - PC Male Connector

Pneuflex male connector is used to tube a female thread port in the same direction. Male connector is a kind of generally used push to connect fitting. Male connector (male straight) has different models and can meet the needs of various pipes. Pneumatic male straight thread is coated with Teflon and good seal performance. Pneumatic male straight external tightening with a flat wrench or socket wrench and internal adjustment with an Allen wrench. The body of the male connector can be nickel plated brass or natural brass. Accommodate inch tubing O.D ranging from 1/8" to 1/2" and thread size ranging from BSPT 1/8 to BSPT 1/2.

Part #: PC Male Connector
Fluid Admitted: Air, Vaccum, Water*
Body Material: Nickel Plated Brass
Thread Sealing: Teflon-coating
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Metric Tube ØD
4mm 5mm 6mm 7mm 8mm 9mm 10mm 12mm 14mm 15mm 16mm
 
Inch Tube ØD
1/8" 5/32" 3/16" 1/4" 5/16" 3/8" 1/2"
 
Thread Standard and Type
R, PT, BSPT -- 55° Taper Pipe Thread Metric Thread*
R1/8 R1/4 R3/8 R1/2 M5 x 0.8 M6 x 1 M8 x 1 M10 x 1 M12 x 1.25 M14 x 1.5 M16 x 1.5 M20 x 1.5

Part No. Push-in Tube ØD(Inch) Thread (PT, R, BSPT)
PC 1/8-01 1/8" R1/8
PC 1/8-02 1/8" R1/4
PC 5/32-01 5/32" R1/8
PC 5/32-02 5/32" R1/4
PC 1/4-01 1/4" R1/8
PC 1/4-02 1/4" R1/4
PC 1/4-03 1/4" R3/8
PC 1/4-04 1/4" R1/2
PC 5/16-01 5/16" R1/8
PC 5/16-02 5/16" R1/4
PC 5/16-03 5/16" R3/8
PC 5/16-04 5/16" R1/2
PC 3/8-01 3/8" R1/8
PC 3/8-02 3/8" R1/4
PC 3/8-03 3/8" R3/8
PC 3/8-04 3/8" R1/2
PC 1/2-01 1/2" R1/8
PC 1/2-02 1/2" R1/4
PC 1/2-03 1/2" R3/8
PC 1/2-04 1/2" R1/2

 

*Metric composite push to connec tfittings - PC male connector is not intended for use in potable water systems

There are no reviews for this product.
Write a review
BadExcellent