Pneuflex has distributors and customers in more than 30 countries and regions.

Inch Composite Push to Connect Fittings (BSPP, G Thread)

Pneuflex's metric composite push in fittings (pneumatic fittings, push to connect fittings) are made of nickel plated brass(thread) and PBT(body). Stainless steel tube gripping claws, collars and release sleeves(collets) offer a quick hold and release mechanism to provide a low disconnection force for easy removal of the tubing. Pneuflex's push in fittings (push to connect fittings) come in a variety of types, models and sizes to satisfy various piping demands and provide essential links between components in pneumatic systems. Accommodate inch tubing O.D ranging from 1/8" to 1/2" and inch tubing O.D from 1/8" to 1/2". Thread sizes ranges from BSPP, G1/8 to BSPP, G1/2.

  • Accepts inch tubing from 1/8" to 1/2"
  • Accommodate male and female thread from BSPP, G1/8 to BSPP, G1/2
  • Release sleeve allows easy removal of tubing without damaging the tubing
  • Multi-colored oval and round release sleeve
  • Elbow, Tee, Y and Banjo with thread allow rotation of the body for ease of installation in confined spaces

Technical Characteristics

Metric Composite Push to Connect Fittings (PT, R, BSPT Thread) Structure    Fluid Admitted Air, Vacuum, Water (no freezing)
   Working Pressure 0—1.0MPa | 0—150psi
   Proof Pressure 3.0Mpa | 435psi
   Negative Pressure -100Kpa | -29.5 In Hg
   Working Temperature 0—60°C | 32~140°F
   Applicable Tube PU / PA / PE / PVC
   Body Nickel Plated Brass & PBT
   Seal, O-ring NBR
   Lock Claw Stainless Steel(SUS)

Metric Tubing O.D

Metric Tube ØD
4mm 5mm 6mm 7mm 8mm 9mm 10mm 12mm 14mm 15mm 16mm

Thread Standard and Type

Thread Standard and Type
R, PT, BSPT -- 55° Taper Pipe Thread Metric Thread
R1/8 R1/4 R3/8 R1/2 M5 x 0.8 M6 x 1 M8 x 1 M10 x 1 M12 x 1.25 M14 x 1.5 M16 x 1.5 M20 x 1.5
UNF NPT-60°American Standard Taper Pipe Thread BSPP, G-55° Parallel Pipe Thread
10-32UNF 1/8 NPT 1/4 NPT 3/8 NPT 1/2 NPT G1/8 G1/4 G3/8 G1/2

Various Types of Metric Composite Push to Connect Fittings with BSPP, G Thread

Comparision of Technical Characteristics

  Composite Push to Connect Fittings Brass Push to Connect Fittings 316 Stainless Steel Push to Connect Fittings
 Fluid Admitted Air, Vacuum, Water (no freezing) Air, Water, Steam Air, Vaccum, Steem
 Working Pressure 0—1 .0MPa | 0—150psi 0—2.0MPa | 0—290psi 0—2.0MPa | 0—290psi
 Proof Pressure 3.0Mpa | 435psi 3.0Mpa | 435psi 3.0Mpa | 435psi
 Negative Pressure -100Kpa | -29.5 In Hg -100Kpa | -29.5 In Hg -100Kpa | -29.5 In Hg
 Working  Temperature 0—60°C | 32—140°F -20—150°C | -4—302°F -20—150°C | -4—302°F
 Body Nickel Plated Brass & PBT Nickel Plated Brass / Brass 316 Stainless Steel
 Seal, O-ring NBR FKM (Viton) / NBR FKM (Viton)
 Lock Claw Stainless Steel(SUS) Brass Stainless Steel(SUS)

pneuflex bottom logo

© 2018 Pneuflex Pneumatic Co.,Ltd. All Rights Reserved.
Add: No.727, Suntang North Road, Cixi, Ningbo, China 315300. Tel: +86 574 23619802 Fax: +86 574 23619805
Pneuflex Official Websites: