Composite Push to Connect Fittings for Metric Tubing, PT, R, BSPT Thread -- PD Male Run Tee

Metric composite push to connect fitting - PD male run tee is used to in line connect 2 metric tubes at a 90° angle to a female R, PT, BSPT thread. Metric composite push to connect fitting PD male run tee connects metric tubing O.D from 4mm to 16mm. Accommodate R, PT, BSPT thread from M5, M6, 1/8" to 1/2". External tightening with a flat spanner.

Male Run Tee, Metric Composite Push to Connect Fittings
Fluid Admitted: Air, Vaccum, Water*
Push-in Tubing O.D: From 4mm to 16mm
Thread Size: From M5, M6, BSPT 1/8 to BSPT 1/2
Body Material: Nickel Plated Brass & PBT
Thread Sealing: Teflon-coating
Working Pressure: 0—1.0MPa | 0—150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0—60°C | 32—140°F
Metric Tube ØD
4mm 5mm 6mm 7mm 8mm 9mm 10mm 12mm 14mm 15mm 16mm

Thread Standard and Type
R, PT, BSPT -- 55° Taper Pipe Thread
R1/8 R1/4 R3/8 R1/2

Part No. Push-in Tubing O.D Thread Size
PD 04-M5 4mm M5 x 0.8
PD 04-M6 4mm M6 x 1
PD 04-01 4mm PT, R, BSPT 1/8
PD 04-02 4mm PT, R, BSPT 1/4
PD 06-M5 6mm M5 x 0.8
PD 06-M6 6mm M6 x 1
PD 06-01 6mm PT, R, BSPT 1/8
PD 06-02 6mm PT, R, BSPT 1/4
PD 06-03 6mm PT, R, BSPT 3/8
PD 06-04 6mm PT, R, BSPT 1/2
PD 08-01 8mm PT, R, BSPT 1/8
PD 08-02 8mm PT, R, BSPT 1/4
PD 08-03 8mm PT, R, BSPT 3/8
PD 08-04 8mm PT, R, BSPT 1/2
PD 10-01 10mm PT, R, BSPT 1/8
PD 10-02 10mm PT, R, BSPT 1/4
PD 10-03 10mm PT, R, BSPT 3/8
PD 10-04 10mm PT, R, BSPT 1/2
PD 12-01 12mm PT, R, BSPT 1/8
PD 12-02 12mm PT, R, BSPT 1/4
PD 12-03 12mm PT, R, BSPT 3/8
PD 12-04 12mm PT, R, BSPT 1/2
PD 16-02 16mm PT, R, BSPT 1/4
PD 16-03 16mm PT, R, BSPT 3/8
PD 16-04 16mm PT, R, BSPT 1/2