Composite Push to Connect Fittings for Metric Tubing, PT, R, BSPT Thread -- PB Male Branch Tee

Composite push to connect fitting - PB male branch tee is used to connect 2 metric tubes at a 90° angle to a female R, PT, BSPT threaded port. External tightening with a flat spanner. PB male branch tee connects metric tubing O.D from 4mm to 16mm and accommodate R, PT, BSPT thread from M5, M6, 1/8" to 1/2". The push-to function built inside provides connecting and disconnecting tubing easily.

Metric Push to Connect Fittings, Male Branch Tee
Fluid Admitted: Air, Vaccum, Water*
Push-in Tubing O.D: From 4mm to 16mm
Thread Size: From M5, M6, BSPT 1/8 to BSPT 1/2
Body Material: Nickel Plated Brass & PBT
Thread Sealing: Teflon-coating
Working Pressure: 0—1.0MPa | 0—150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0—60°C | 32—140°F
Metric Tube ØD
4mm 5mm 6mm 7mm 8mm 9mm 10mm 12mm 14mm 15mm 16mm

Thread Standard and Type
R, PT, BSPT -- 55° Taper Pipe Thread
R1/8 R1/4 R3/8 R1/2

Part No. Description Fluid Admitted Push-in Tubing O.D Thread Size Body Material Body (noise adsorbing material) Thread Material Base (Thread Material) Thread Sealing Working Pressure Proof Pressure Negative Pressure Working Temperature MOQ
4mm O.D Tubing, M5 x 0.8 Male Thread with an O-ring

Push to connect fitting male branch tee PB 04-M5 is used to connect two 4mm metric tubes at a 90° angle to a M5 x 0.8 female threaded port. External tightening with a flat spanner. Metric 4mm O.D tubig to M5 x 0.8 male branch tee body parts is made of PBT and the thread is made of nickel plated brass. Male thread M5 x 0.8 with an O-ring for perfect sealing. The push-to function built inside provides connecting and disconnecting tubing easily.

Air, Vaccum, Water* 4mm M5 x 0.8 Male Thread PBT Nickel Plated Brass O-ring 0—1.0MPa | 0—150psi 3.0Mpa | 435psi -100Kpa | -29.5 In Hg 0—60°C | 32—140°F 500PCS
4mm O.D Tubing, M6 x 1.0 Male Thread with an O-ring

Push in fitting male branch tee is used to connect two 4mm metric tubes at a 90° angle to a M6 x 1.0 female thread. The body of 4mm O.D Tubing to M6 x 1.0 male thread male branch tee is made of PBT and the thread is made of nickel plated brass. PB 06-M6 male thread with an O-ring for perfect sealing. External tightening with a flat spanner. The push-to function built inside provides connecting and disconnecting tubing easily.

Air, Vaccum, Water* 4mm M6 x 1.0 Male Thread PBT Nickel Plated Brass O-ring 0—1.0MPa | 0—150psi 3.0Mpa | 435psi -100Kpa | -29.5 In Hg 0—60°C | 32—140°F 500PCS
4mm O.D Tubing, R 1/8 Male Thread

Pneumatic 4mm O.D tubing to PT, R, BSPT 1/8 male thread body parts is made of PBT and the thread is made of nickel plated brass. Push to connect air line fitting male branch tee PB 04-01 is used to connect two 4mm metric tubes and a R 1/8 female thread at a 90° angle. The male thread is coated with Teflon for perfect sealing. External tightening with a flat spanner. The push-to function built inside provides connecting and disconnecting tubing easily.

Air, Vaccum, Water* 4mm BSPT (R) 1/8 Male Thread PBT Nickel Plated Brass Teflon-coating 0—1.0MPa | 0—150psi 3.0Mpa | 435psi -100Kpa | -29.5 In Hg 0—60°C | 32—140°F 500PCS
4mm O.D Tubing, R 1/4 Male Thread

Pneumatic to connect air line fitting male branch tee PB 04-02 is used to connect two 4mm metric tubes and a PT, R, BSPT 1/4 female thread at a 90° angle. The body of 4mm O.D tubing to male BSPT 1/4 thread male branch tee is made of PBT and the thread is made of nickel plated brass. The male thread is equipped with Teflon for perfect sealing. External tightening with a flat spanner. The push-to function built inside provides connecting and disconnecting tubing easily.

Air, Vaccum, Water* 4mm BSPT (R) 1/4 Male Thread PBT Nickel Plated Brass Teflon-coating 0—1.0MPa | 0—150psi 3.0Mpa | 435psi -100Kpa | -29.5 In Hg 0—60°C | 32—140°F 500PCS
6mm O.D Tubing, M5 x 0.8 Male Thread with an O-ring

Pneuamtic push to connect fitting male branch tee PB 06-M5 body parts is made of PBT and the thread is made of nickel plated brass. Metric 6mm O.D tubing to M5 x 0.8 male thread male branch tee is used to connect two 6mm metric tubes and M5 x 0.8 female thread at a 90° angle. The male thread is coated with Teflon for perfect sealing. External tightening with a flat spanner. The push-to function built inside provides connecting and disconnecting tubing easily.

Air, Vaccum, Water* 6mm M5 x 0.8 Male Thread PBT Nickel Plated Brass O-ring 0—1.0MPa | 0—150psi 3.0Mpa | 435psi -100Kpa | -29.5 In Hg 0—60°C | 32—140°F 500PCS
6mm O.D Tubing, M6 x 1.0 Male Thread with an O-ring

Push to connect air line fitting male branch tee PB 06-M6 body parts is made of PBT and the thread is made of nickel plated brass. Male branch tee 6mm O.D tubing to M6 x 1.0 male thread with O-ring for perfect sealing. PB 06-M6 is used to connect two 6mm metric tubes at a 90° angle to a M6 x 1.0 female thread. External tightening with a flat spanner. The push-to function built inside provides connecting and disconnecting tubing easily.

Air, Vaccum, Water* 6mm M6 x 1.0 Male Thread PBT Nickel Plated Brass O-ring 0—1.0MPa | 0—150psi 3.0Mpa | 435psi -100Kpa | -29.5 In Hg 0—60°C | 32—140°F 500PCS
6mm O.D Tubing, R 1/8 Male Thread

Metric 6MM x BSPT 1/8 thread male branch tee is used to connect two 6mm metric tubes and R 1/8 female thread at a 90° angle. Pneumatic push in fitting male branch tee PB 06-01 body parts is made of PBT and the thread is made of nickel plated brass. The male thread is  equipped with Teflon for perfect sealing. External tightening with a flat spanner. The push-to function built inside provides connecting and disconnecting tubing easily.

Air, Vaccum, Water* 6mm BSPT (R) 1/8 Male Thread PBT Nickel Plated Brass Teflon-coating 0—1.0MPa | 0—150psi 3.0Mpa | 435psi -100Kpa | -29.5 In Hg 0—60°C | 32—140°F 500PCS
6mm O.D Tubing, R 1/4 Male Thread

Composite metric push to connect fitting male branch tee PB 06-02 is used to connect 6mm metric tubing at a 90° angle to a PT, R, BSPT 1/4 female thread. Male branch tee 6mm O.D tubing, R 1/4 male thread body parts is made of PBT and the thread is made of nickel plated brass. The male thread is equipped with Teflon for perfect sealing. External tightening with a flat spanner. The push-to function built inside provides connecting and disconnecting tubing easily.

Air, Vaccum, Water* 6mm BSPT (R) 1/4 Male Thread PBT Nickel Plated Brass Teflon-coating 0—1.0MPa | 0—150psi 3.0Mpa | 435psi -100Kpa | -29.5 In Hg 0—60°C | 32—140°F 500PCS
6mm O.D Tubing, R 3/8 Male Thread

The body of 6mm O.D tubing to PT, R, BSPT 3/8 male thread is made of PBT and the thread is made of nickel plated brass. Pneumatic male branch tee push in fitting PB 06-03 is used to connect two 6mm metric tubes at a 90° angle to a R 3/8 female thread. The male thread is coated with Teflon for perfect sealing. External tightening with a flat spanner. The push-to function built inside provides connecting and disconnecting tubing easily.

Air, Vaccum, Water* 6mm BSPT (R) 3/8 Male Thread PBT Nickel Plated Brass Teflon-coating 0—1.0MPa | 0—150psi 3.0Mpa | 435psi -100Kpa | -29.5 In Hg 0—60°C | 32—140°F 500PCS
6mm O.D Tubing, R 1/2 Male Thread

Male branch tee air line fitting PB 06-04 is used to connect two 6mm metric tubes at a 90° angle to a R 1/2 female thread. The body of 6mm O.D tubing to PT, R, BSPT 1/2 male thread is made of PBT and the thread is made of nickel plated brass. The male thread is equipped with Teflon for perfect sealing. External tightening with a flat spanner. The push-to function built inside provides connecting and disconnecting tubing easily.

Air, Vaccum, Water* 6mm BSPT (R) 1/2 Male Thread PBT Nickel Plated Brass Teflon-coating 0—1.0MPa | 0—150psi 3.0Mpa | 435psi -100Kpa | -29.5 In Hg 0—60°C | 32—140°F 500PCS
8mm O.D Tubing, R 1/8 Male Thread

The body of 8mm O.D tubing, R 1/8 male thread male branch tee is made of PBT and the thread is made of nickel plated brass. Push to connect air line fitting PB 08-01 male branch tee is used to connect two 8mm metric tubes and R 1/8 female thread at a 90° angle. 8MM x BSPT 1/8 male thread with Teflon-coating for perfect sealing. External tightening with a flat spanner. The push-to function built inside provides connecting and disconnecting tubing easily.

Air, Vaccum, Water* 8mm BSPT (R) 1/8 Male Thread PBT Nickel Plated Brass Teflon-coating 0—1.0MPa | 0—150psi 3.0Mpa | 435psi -100Kpa | -29.5 In Hg 0—60°C | 32—140°F 500PCS
8mm O.D Tubing, R 1/4 Male Thread

Push to connect air line fitting body parts is made of PBT and the thread is made of nickel plated brass. Metric 8MM x BSPT 1/4 male thread male branch tee is used to connect two 8mm metric tubes at a 90° angle to a R 1/4 female thread. The male thread is equipped with Teflon for perfect sealing. External tightening with a flat spanner. The push-to function built inside provides connecting and disconnecting tubing easily.

Air, Vaccum, Water* 8mm BSPT (R) 1/4 Male Thread PBT Nickel Plated Brass Teflon-coating 0—1.0MPa | 0—150psi 3.0Mpa | 435psi -100Kpa | -29.5 In Hg 0—60°C | 32—140°F 500PCS
8mm O.D Tubing, R 3/8 Male Thread

Metric 8mm O.D tubing to PT, R, BSPT 3/8 male thread is used to connect two 8mm metric tubes and R 3/8 female thread at a 90° angle. Pneumatic push in fitting male branch tee PB 08-03 body parts is made of PBT and the thread is made of nickel plated brass. The male thread is equipped with Teflon for perfect sealing. External tightening with a flat spanner. The push-to function built inside provides connecting and disconnecting tubing easily.

Air, Vaccum, Water* 8mm BSPT (R) 3/8 Male Thread PBT Nickel Plated Brass Teflon-coating 0—1.0MPa | 0—150psi 3.0Mpa | 435psi -100Kpa | -29.5 In Hg 0—60°C | 32—140°F 500PCS
8mm O.D Tubing, R 1/2 Male Thread

The body of 8MM x BSPT 1/2 male thread is made of PBT and the thread is made of nickel plated brass. Push to connect air line fitting male branch tee PB 08-04 is used to connect two 8mm metric tubes and BSPT 1/2 female thread at a 90° angle. The thread is coated with Teflon for perfect sealing. External tightening with a flat spanner. The push-to function built inside provides connecting and disconnecting tubing easily.

Air, Vaccum, Water* 8mm BSPT (R) 1/2 Male Thread PBT Nickel Plated Brass Teflon-coating 0—1.0MPa | 0—150psi 3.0Mpa | 435psi -100Kpa | -29.5 In Hg 0—60°C | 32—140°F 500PCS
10mm O.D Tubing, R 1/8 Male Thread

Pneumatic push in fitting male branch tee is used to connect two 10mm metric tubes at a 90° angle to a BSPT 1/8 female thread. Male branch tee 10mm O.D tubing, R 1/8 male thread body parts is made of PBT and the thread is made of nickel plated brass. The male thread is coated with Teflon for perfect sealing. External tightening with a flat spanner. The push-to function built inside provides connecting and disconnecting tubing easily.

Air, Vaccum, Water* 10mm BSPT (R) 1/8 Male Thread PBT Nickel Plated Brass Teflon-coating 0—1.0MPa | 0—150psi 3.0Mpa | 435psi -100Kpa | -29.5 In Hg 0—60°C | 32—140°F 500PCS
10mm O.D Tubing, R 1/4 Male Thread

The body of 10mm O.D tubing to PT, R, BSPT 1/4 male thread is made of PBT and the thread is made of nickel plated brass. Male branch tee air line fitting PB 10-02 is used to connect two 10mm metric tubes at a 90° angle. PB 10-02 male branch tee with Teflon-coating for perfect sealing. External tightening with a flat spanner. The push-to function built inside provides connecting and disconnecting tubing easily.

Air, Vaccum, Water* 10mm BSPT (R) 1/4 Male Thread PBT Nickel Plated Brass Teflon-coating 0—1.0MPa | 0—150psi 3.0Mpa | 435psi -100Kpa | -29.5 In Hg 0—60°C | 32—140°F 500PCS
10mm O.D Tubing, R 3/8 Male Thread

Push to connect air line fitting PB 10-03 is used to connect two 10mm metric tubes at a 90° angle to a BSPT 3/8 female thread. The body of metric 10MM x BSPT 3/8 male thread is made of PBT and the thread is made of nickel plated brass. The male thread is equipped with Teflon for perfect sealing. External tightening with a flat spanner. The push-to function built inside provides connecting and disconnecting tubing easily.

Air, Vaccum, Water* 10mm BSPT (R) 3/8 Male Thread PBT Nickel Plated Brass Teflon-coating 0—1.0MPa | 0—150psi 3.0Mpa | 435psi -100Kpa | -29.5 In Hg 0—60°C | 32—140°F 500PCS
10mm O.D Tubing, R 1/2 Male Thread

The body of 10mm O.D tubing to PT, R, BSPT 1/2 male thread is made of PBT and the thread is made of nickel plated brass. Pneumatic push to connect air line fitting male branch tee PB 10-04 is used to connect two 10mm metric tubes at a 90° angle to R 1/2 female thread. The male thread is coated for good sealing. External tightening with a flat spanner. The push-to function built inside provides connecting and disconnecting tubing easily.

Air, Vaccum, Water* 10mm BSPT (R) 1/2 Male Thread PBT Nickel Plated Brass Teflon-coating 0—1.0MPa | 0—150psi 3.0Mpa | 435psi -100Kpa | -29.5 In Hg 0—60°C | 32—140°F 500PCS
12mm O.D Tubing, R 1/8 Male Thread

The body of 12mm O.D tubing to PT, R, BSPT 1/8 male thread is made of PBT and the thread is made of nickel plated brass. Male branch tee air line fitting PB 12-01 is used to connect two 12mm metric tubes and R 1/8 female thread at a 90° angle. The male thread is coated with Teflon for perfect sealing. External tightening with a flat spanner. The push-to function built inside provides connecting and disconnecting tubing easily.

Air, Vaccum, Water* 12mm BSPT (R) 1/8 Male Thread PBT Nickel Plated Brass Teflon-coating 0—1.0MPa | 0—150psi 3.0Mpa | 435psi -100Kpa | -29.5 In Hg 0—60°C | 32—140°F 500PCS
12mm O.D Tubing, R 1/4 Male Thread

Pneumatic push in fitting male branch tee PB 12-02 body parts is made of PBT and the thread is made of nickel plated brass. Male branch tee 12mm O.D tubing, R 1/4 male thread is used to connect two 12mm metric tubes at a 90° angle to a BSPT 1/2 female thread. The male thread is equipped with Teflon-coating for perfect sealing. External tightening with a flat spanner. The push-to function built inside provides connecting and disconnecting tubing easily.

Air, Vaccum, Water* 12mm BSPT (R) 1/4 Male Thread PBT Nickel Plated Brass Teflon-coating 0—1.0MPa | 0—150psi 3.0Mpa | 435psi -100Kpa | -29.5 In Hg 0—60°C | 32—140°F 500PCS
12mm O.D Tubing, R 3/8 Male Thread

Male branch tee push to connect fitting PB 12-03 connects two 12mm metric tubes at a 90° angle to a R 3/8 female thread. The body of metric 12mm O.D tubing to PT, R, BSPT 3/8 male thread is made of PBT and the thread is made of nickel plated brass. The male thread is equipped with Teflon-coating for perfect sealng. External tightening with a flat spanner. The push-to function built inside provides connecting and disconnecting tubing easily.

Air, Vaccum, Water* 12mm BSPT (R) 3/8 Male Thread PBT Nickel Plated Brass Teflon-coating 0—1.0MPa | 0—150psi 3.0Mpa | 435psi -100Kpa | -29.5 In Hg 0—60°C | 32—140°F 500PCS
12mm O.D Tubing, R 1/2 Male Thread

Metric male branch tee 12MM x BSPT 1/2 male thread body parts is made of PBT and the thread is made of nickel plated brass. Pneumatic push to connect air line fitting male branch tee PB 12-04 is used to connect two 12mm metric tubes at a 90° angle to a PT, R, BSPT 1/2 female thread. PB 12-04 male branch tee with Teflon-coating for perfect sealing. External tightening with a flat spanner. The push-to function built inside provides connecting and disconnecting tubing easily.

Air, Vaccum, Water* 12mm BSPT (R) 1/2 Male Thread PBT Nickel Plated Brass Teflon-coating 0—1.0MPa | 0—150psi 3.0Mpa | 435psi -100Kpa | -29.5 In Hg 0—60°C | 32—140°F 500PCS
16mm O.D Tubing, R 1/4 Male Thread

Metric male branch tee 16mm O.D tubing, R 1/4 male thread body parts is made of PBT and the thread is made of nickel plated brass. Pneumatic push to connect air line fitting male branch tee PB 16-02 is used to connect two 16mm metric tubes at a 90° angle to a PT, R, BSPT 1/4 female thread. PB 16-02 male branch tee with Teflon-coating for perfect sealing. External tightening with a flat spanner. The push-to function built inside provides connecting and disconnecting tubing easily.

Air, Vaccum, Water* 16mm BSPT (R) 1/4 Male Thread PBT Nickel Plated Brass Teflon-coating 0—1.0MPa | 0—150psi 3.0Mpa | 435psi -100Kpa | -29.5 In Hg 0—60°C | 32—140°F 500PCS
16mm O.D Tubing, R 3/8 Male Thread

The body of 16MM x BSPT 3/8 male thread male branch tee is made of PBT and the thread is made of nickel plated brass. Pneumatic push in fitting male branch tee is used to connect 16mm metric tubing and R 1/8 female thread at a 90° angle. The male thread is equipped with Teflon-coating for perfect sealing. External tightening with a flat spanner. The push-to function built inside provides connecting and disconnecting tubing easily.

Air, Vaccum, Water* 16mm BSPT (R) 3/8 Male Thread PBT Nickel Plated Brass Teflon-coating 0—1.0MPa | 0—150psi 3.0Mpa | 435psi -100Kpa | -29.5 In Hg 0—60°C | 32—140°F 500PCS
16mm O.D Tubing, R 1/2 Male Thread

Push to connect male branch tee PB 16-04 is used to connect two 16mm metric tubes at a 90° angle to a R 1/2 female thread. The body of 16mm O.D tubing to PT, R, BSPT 1/2 male thread is made of PBT and the thread is made of nickel plated brass. The male thread is coated with Teflon for perfect sealing. External tightening with a flat spanner. The push-to function built inside provides connecting and disconnecting tubing easily.

Air, Vaccum, Water* 16mm BSPT (R) 1/2 Male Thread PBT Nickel Plated Brass Teflon-coating 0—1.0MPa | 0—150psi 3.0Mpa | 435psi -100Kpa | -29.5 In Hg 0—60°C | 32—140°F 500PCS