Brass Push to Connect Fittings for Metric Tubing, PT, R, BSPT, NPT, UNC, UNF Thread

Brass Push to Connect Fittings for Metric Tubing, PT, R, BSPT, NPT, UNC, UNF Thread

Pneuflex's metric brass push to connect fittings (pneumatic fittings, push in fittings) are made of nickel plated brass or brass. Brass push to connect fittings are available in few common types, straight, elbow, tee, reducer, union, bulkhead, plug, etc. Nickel plated brass push to connect fittings are recommended for compressed air, pneumatic, instrumentation, circuit, lubricant and cooling lines. Brass push to connect fittings are solution for pneumatic applications and other fluids in aggressive environment. Accommodate metric tubing O.D ranging from 4mm to 16mm and inch tubing O.D from 1/8" to 1/2". Thread sizes ranges from BSPT, PT, R1/8 to BSPT, PT, R1/2.

  • Accepts metric tubing from 4mm to 16mm
  • Accommodate male and female thread from R1/8 to R1/2
  • Elbow, Tee, Y and Banjo with thread allow rotation of the body for ease of installation in confined spaces

Technical Characteristics

Metric Composite Push to Connect Fittings (PT, R, BSPT Thread) Structure    Fluid Admitted Air, Vacuum, Water (no freezing)
   Working Pressure 0—2.0MPa | 0—290psi
   Proof Pressure 3.0Mpa | 435psi
   Negative Pressure -100Kpa | -29.5 In Hg
   Working Temperature -20—150°C | -4—302°F
   Applicable Tube PU/PA/PE/PVC/FEP/PFA
   Body Nickel Plated Brass / Brass
   Seal, O-ring FKM (Viton) / NBR
   Lock Claw Brass
 

 

Various Types of Metric Brass Push to Connect Fittings with PT, R, BSPT Thread