Brass Push to Connect Fittings for Inch (Imperial) Tubing, BSPP, G Thread

Pneuflex's metric brass push to connect fittings (pneumatic fittings, push in fittings) are made of nickel plated brass or brass. Brass push to connect fittings are available in few common types, straight, elbow, tee, reducer, union, bulkhead, plug, etc. Nickel plated brass push to connect fittings are recommended for compressed air, pneumatic, instrumentation, circuit, lubricant and cooling lines. Brass push to connect fittings are solution for pneumatic applications and other fluids in aggressive environment. Accommodate metric tubing O.D ranging from 4mm to 16mm and inch tubing O.D from 1/8" to 1/2". Thread sizes ranges from 1/8NPT to 1/2NPT.

  • Accepts metric tubing from 4mm to 16mm
  • Accommodate male and female thread from 1/8NPT to 1/2NPT
  • Elbow, Tee, Y and Banjo with thread allow rotation of the body for ease of installation in confined spaces

Technical Characteristics

Metric Composite Push to Connect Fittings (PT, R, BSPT Thread) Structure    Fluid Admitted Air, Vacuum, Water (no freezing)
   Working Pressure 0—2.0MPa | 0—290psi
   Proof Pressure 3.0Mpa | 435psi
   Negative Pressure -100Kpa | -29.5 In Hg
   Working Temperature -20—150°C | -4—302°F
   Applicable Tube PU/PA/PE/PVC/FEP/PFA
   Body Nickel Plated Brass / Brass
   Seal, O-ring FKM (Viton) / NBR
   Lock Claw Brass
 

Metric Tubing O.D

Metric Tube ØD
4mm 5mm 6mm 7mm 8mm 9mm 10mm 12mm 14mm 15mm 16mm
 

Thread Standard and Type

Thread Standard and Type
R, PT, BSPT -- 55° Taper Pipe Thread Metric Thread
R1/8 R1/4 R3/8 R1/2 M5 x 0.8 M6 x 1 M8 x 1 M10 x 1 M12 x 1.25 M14 x 1.5 M16 x 1.5 M20 x 1.5
 
UNF NPT-60°American Standard Taper Pipe Thread BSPP, G-55° Parallel Pipe Thread
10-32UNF 1/8 NPT 1/4 NPT 3/8 NPT 1/2 NPT G1/8 G1/4 G3/8 G1/2
 

Various Types of Metric Brass Push to Connect Fittings with NPT Thread