SPH 5/16-N04 | 5/16" O.D Tubing, 1/2 NPT, Male Banjo Elbow Connector | Stainless Steel Push to Connect Fitting

SPH 5/16-N04 male banjo elbow connector stainless steel push to connect fitting is used to connect a female 1/2 NPT threaded connection to a 5/16" tubing at a 90° angle. The body of 5/16" O.D tubing to 1/2 NPT male banjo elbow connector stainless steel push in fitting is made of 316 stainless steel for corrosion resistance, FKM seal for chemical-resistance. Male banjo elbow connector stainless steel pneumatic fitting is suitable for air, pneumatic, machine tools, food and beverage applications. Male banjo elbow connector stainless steel push to connect fitting has hexagon head on the top allows tightening with a hexagon wrench in limited spaces. The Pneuflex stainless steel fitting allows tubing to be connected and reconnected repeatedly without damaging the tube or fitting.

Part #: SPH 5/16-N04
Push-in Tubing O.D: 5/16"
Thread Size: 1/2 NPT
Fluid Admitted: Air, Vaccum, Water (no freezing), Steam, Oil
Body Material: 316 Stainless Steel
Thread Material: 316 Stainless Steel
Seal, O-ring: FKM (Viton)
Working Pressure: 0~2.0 MPa | 0~290 psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20~150°C | -4~302°F

Dimensions of SPH 5/16-N04 Male Banjo Elbow Connector | Stainless Steel Push to Connect Fitting

 SPH 5/16-N04, 5/16 Inch O.D Tubing, 1/2 NPT, Male Banjo Elbow Connector, Stainless Steel Push to Connect Fitting

Part No. TUBE R L3 L1 L2 D1
SPH 5/16-N04 5/16" 1/2 NPT 14mm 40mm  35mm  13.6mm
There are no reviews for this product.

Write a review

BadExcellent
Verification code *
Captcha ImageReload captcha image challenge