PLL 5/16-N04 | 5/16" O.D Tubing, 1/2 NPT Extended Male Elbow Connector | Push to Connect Fitting

PLL 5/16-N04 extended male elbow connector push to connect fitting is used to connect a female 1/2 NPT threaded connection to a 5/16" tubing at a right angle. The body of 5/16" O.D tubing to 1/2 NPT extended male elbow connector push in fitting is made of nickel plated brass, strong thermoplastic (PBT), POM release sleeve and stainless steel tube gripping claw. Extended male elbow connector push-in fittings are high enough that you can fit classic male elbow fitting below. Extended male elbow connector pneumatic fitting is suitable for air, pneumatic and machine tools applications. External tightening with a flat wrench or socket wrench. The Pneuflex fitting allows tubing to be connected and reconnected repeatedly without damaging the tube or fitting.

Part #: PLL 5/16-N04
Push-in Tubing O.D: 5/16"
Thread Size: 1/2 NPT
Fluid Admitted: Air, Vaccum, Water (no freezing)
Body Material: PBT Plastic
Thread Material: Nickel Plated Brass
Thread Sealing: Teflon-coating
Seal, O-ring: NBR
Working Pressure: 0~1.0 MPa | 0~150 psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0~60°C | 32~140°F

Dimensions of PLL 5/16-N04 Extended Male Elbow Connector | Push to Connect Fitting

 PLL 5/16-N04, 5/16 Inch O.D Tubing, 1/2 NPT Extended Male Elbow Connector, Push to Connect Fitting

Part No. TUBE R E B ΦP A H
PLL 5/16-N04 5/16" 1/2 NPT 23mm 51mm 15mm 14mm 7/8"
There are no reviews for this product.

Write a review

Verification code *
Captcha ImageReload captcha image challenge