PD 04-02 | 4mm O.D Tubing, R, PT, BSPT 1/4 Male Run Tee | Push to Connect Fitting
Metric 4mm O.D tubing to PT, R, BSPT 1/4 male run tee is used to in line connect two 4mm metric tubes at a 90° angle to a R 1/4 female thread. Pneumatic push to connect air line fitting male run tee PD 04-02 body parts is made of PBT and the male thread is made of nickel plated brass. The male thread is coated with Teflon for perfect sealing. External tightening with a flat spanner.
Part #: PD 04-02
Push-in Tubing O.D: 4mm
Thread Size: PT, R, BSPT 1/4
Fluid Admitted: Air, Vaccum, Water (no freezing)
Body Material: PBT Plastic
Thread Material: Nickel Plated Brass
Thread Sealing: Teflon-coating
Seal, O-ring: NBR
Working Pressure: 0~1.0 MPa | 0~150 psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0~60°C | 32~140°F
Thread Size: PT, R, BSPT 1/4
Fluid Admitted: Air, Vaccum, Water (no freezing)
Body Material: PBT Plastic
Thread Material: Nickel Plated Brass
Thread Sealing: Teflon-coating
Seal, O-ring: NBR
Working Pressure: 0~1.0 MPa | 0~150 psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0~60°C | 32~140°F