SPB 1/4-G02, 1/4" O.D Tubing, BSPP, G 1/4 Male Tee Branch, Stainless Steel Push to Connect Fitting

SPB 1/4-G02 male tee branch stainless steel push to connect fitting is used to connect two 1/4" tube connections on two straight ends to a female BSPP, G 1/4 threaded connection on the branch at right angles. The body of 1/4" O.D tubing to BSPP, G 1/4 male tee branch stainless steel push in fitting is made of 316 stainless steel for corrosion resistance, FKM seal and o-ring for chemical-resistance. Stainless steel male tee branch fitting is suitable for air, pneumatic, machine tools, food and beverage applications. External tightening with a flat wrench. The Pneuflex stainless steel fitting allows tubing to be connected and reconnected repeatedly without damaging the tube or fitting.

Part #: SPB 1/4-G02
Push-in Tubing O.D: 1/4"
Thread Size: BSPP, G 1/4
Fluid Admitted: Air, Vaccum, Water (no freezing), Steam, Oil
Body Material: 316 Stainless Steel
Thread Material: 316 Stainless Steel
Seal, O-ring: FKM (Viton)
Working Pressure: 0~2.0 MPa | 0~290 psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20~150°C | -4~302°F

Dimensions of SPB 1/4-G02 Male Tee Branch | Stainless Steel Push to Connect Fitting

 SPB 1/4-G02, 1/4 Inch O.D Tubing, BSPP, G 1/4 Male Tee Branch, Stainless Steel Push to Connect Fitting

Part No. TUBE G L2 L1 D L3 CH2
SPB 1/4-G02 1/4" 1/4 28mm 48mm 12.5mm 7mm 17mm
There are no reviews for this product.

Write a review

BadExcellent
Verification code *
Captcha ImageReload captcha image challenge