SPB 1/4-N01, 1/4" O.D Tubing, 1/8 NPT Male Branch Tee, Stainless Steel Push to Connect Fitting

SPB 1/4-N01 male branch tee stainless steel push to connect fitting is used to connect two 1/4" tube connections on two straight ends and a female 1/8 NPT threaded connection on the branch at right angles. The body of 1/4" O.D tubing to 1/8 NPT male branch tee stainless steel push in fitting is made of 316 stainless steel for corrosion resistance, FKM seal for chemical-resistance. Male branch tee stainless steel pneumatic fitting is suitable for air, pneumatic, machine tools, food and beverage applications. External tightening with a flat wrench. The Pneuflex stainless steel fitting allows tubing to be connected and reconnected repeatedly without damaging the tube or fitting.

Part #: SPB 1/4-N01
Push-in Tubing O.D: 1/4"
Thread Size: 1/8 NPT
Fluid Admitted: Air, Vaccum, Water (no freezing), Steam, Oil
Body Material: 316 Stainless Steel
Thread Material: 316 Stainless Steel
Seal: FKM (Viton)
Working Pressure: 0~2.0 MPa | 0~290 psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20~150°C | -4~302°F

Dimensions of SPB 1/4-N01 Male Branch Tee | Stainless Steel Push to Connect Fitting

 SPB 1/4-N01, 1/4 Inch O.D Tubing, 1/8 NPT Male Branch Tee, Stainless Steel Push to Connect Fitting

Part No. TUBE R L1 L2 L3 D1 CH1 CH2
SPB 1/4-N01 1/4" 1/8 NPT 20mm 19mm  8mm 12.5mm 9.2mm 12mm
There are no reviews for this product.
Write a review
BadExcellent