PLL 1/4-N02 | 1/4" O.D Tubing, 1/4 NPT Extended Male Elbow | Push to Connect Fitting

PLL 1/4-N02 extended male elbow push to connect fitting is used to connect a female 1/4 NPT threaded connection to a 1/4" tubing at a right angle. The body of 1/4" O.D tubing to 1/4 NPT extended male elbow push in fitting is made of nickel plated brass, strong thermoplastic (PBT), POM release sleeve and stainless steel tube gripping claw. Extended male elbow push-in fittings are high enough that you can fit classic male elbow fitting below. Extended male elbow pneumatic fitting is suitable for air, pneumatic and machine tools applications. External tightening with a flat wrench or socket wrench. The Pneuflex fitting allows tubing to be connected and reconnected repeatedly without damaging the tube or fitting.

Part #: PLL 1/4-N02
Push-in Tubing O.D: 1/4"
Thread Size: 1/4 NPT
Fluid Admitted: Air, Vaccum, Water (no freezing)
Body Material: PBT Plastic
Thread Material: Nickel Plated Brass
Thread Sealing: Teflon-coating
Seal, O-ring: NBR
Working Pressure: 0~1.0 MPa | 0~150 psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0~60°C | 32~140°F

Dimensions of PLL 1/4-N02 Extended Male Elbow | Push to Connect Fitting

 PLL 1/4-N02, 1/4 Inch O.D Tubing, 1/4 NPT Extended Male Elbow, Push to Connect Fitting

Part No. TUBE R E B ΦP A H
PLL 1/4-N02 1/4" 1/4 NPT 19mm 41mm 13.4mm 10.5mm 9/16"
There are no reviews for this product.

Write a review

BadExcellent
Verification code *
Captcha ImageReload captcha image challenge