SPB 1/2-G04, 1/2" O.D Tubing, BSPP, G 1/2 Male Tee Branch Swivel, Stainless Steel Push to Connect Fitting

SPB 1/2-G04 male tee branch swivel stainless steel push to connect fitting is used to connect two 1/2" tube connections on two straight ends to a female BSPP, G 1/2 threaded connection on the branch at right angles. The body of 1/2" O.D tubing to BSPP, G 1/2 male tee branch swivel stainless steel push in fitting is made of 316 stainless steel for corrosion resistance, FKM seal and o-ring for chemical-resistance. Stainless steel pneumatic fitting is suitable for air, pneumatic, machine tools, food and beverage applications. External tightening with a flat wrench. The Pneuflex stainless steel fitting allows tubing to be connected and reconnected repeatedly without damaging the tube or fitting.

Part #: SPB 1/2-G04
Push-in Tubing O.D: 1/2"
Thread Size: BSPP, G 1/2
Fluid Admitted: Air, Vaccum, Water (no freezing), Steam, Oil
Body Material: 316 Stainless Steel
Thread Material: 316 Stainless Steel
Seal: FKM (Viton)
Working Pressure: 0~2.0 MPa | 0~290 psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20~150°C | -4~302°F

Dimensions of SPB 1/2-G04 Male Tee Branch Swivel | Stainless Steel Push to Connect Fitting

 SPB 1/2-G04, 1/2 Inch O.D Tubing, BSPP, G 1/2 Male Tee Branch Swivel, Stainless Steel Push to Connect Fitting

Part No. TUBE G L2 L1 D L3 CH2
SPB 1/2-G04 1/2" 1/2 41mm 68mm 20.5mm 8mm 24mm
There are no reviews for this product.
Write a review
BadExcellent